Sunday, November 4, 2012

How to Make a Ninjago Green Ninja Costume

Joey, my 6-year-old, wanted to be the Green Ninja for Halloween, but they haven't started selling those costumes yet. So I had to make my very first Halloween costume for him. I searched all over the Internet and couldn't find any really good how-to for us. There were a few that made it very "lego-y" where it was boxed and yellow, like the legos, but Joey wanted to skip the lego details and just concentrate on the Green Ninja (Lloyd)'s costume and outerwear. So here's how I did it:

We were fortunate to have an old TaeKwonDo uniform to use. I couldn't find any online that were green, so we took Joey's old white one and bought some green fabric dye I got at Walmart (I think the brand was Tulip and it comes in the little packets of powder) and dyed it a couple times to get a good shade.


I hung it on a step ladder in the garage to dry. Then my husband brought home some fabric paint tubes for the details.

I needed the diamonds with the crosses in the middle, so I made a diamond stencil for myself to keep them uniform and evenly spaced.

There's a folder inside the jacket to keep the paint from bleeding through and sticking the front and back of the fabric together.



Then I just pained on the the diamonds with the metallic silver fabric paint and the little paint brush supplied.


 Then, after the silver dried,  I used the black paint to paint on the crosses in the center of the diamonds. (The wet spot is my attempt to clean up a spilled paint drop.)


 The back was harder because I have no natural drawing ability. I searched for the design that is on the Green Ninja's back, the golden snake, but couldn't find one online to print out and use as a stencil. So I had to use Word Paint (I think) to create a circle within a circle, and then free-draw the snake head in the program, along with the snake tail wraps.

Then I printed it out the size I wanted, and used a seam-ripper to trace around the design leaving a "stencil" for me to trace. I used a black permanent marker to draw it on the fabric.



 Then I just used the gold paint from the pack to fill in the snake.





 It wasn't centered well. But luckily, my son didn't notice.



Then I needed to put more diamonds with black crosses on the back.




Then I put the diamonds with black crosses on the pants. I started a little low because the jacket comes down low on my son's uniform, so I didn't see the point in painting on some that wouldn't never show.


 Next came the hood. I found an easy online how-to on making a ninja mask from a t-shirt at How2DoStuff.blogspot.com, so we bought a white t-shirt (my son normally wears size 6, and we tried a few different sizes on in the store and thought the size 14/16 fit him best as a hood) and dyed it the same color as the uniform.
Then I put it on like the ninja-mask instructions said (inside out and upside down, with his face looking out the neck hole) and tied the sleeves behind his head, folded the "tag" under and inside, and pulled it up over his nose. And pulled the top down to his brows and folded the seam under. Then I did a quick freehand draw while it was on his head, about how and where the design should go. (I should have made a stencil or printed it offline if it was available, I am horrible at freehand!)


 We let it dry. (I did this part on the night before Halloween, I think.)
We had purchased the black double sword and holder from the Spirit Halloween store, along with the ninja gloves. My husband and son made the golden weapon from a wooden dowel painted gold and plastic sword ends screwed onto the ends.
 I used one of my sweater belts to wrap around him and a piece of foil wrapped around the knot to mimic the Green Ninja's buckle.

 My very picky son was extremely happy with the results!


I hope this helps someone else from searching online for hours trying to find help or something similar to purchase (in stock).

10 comments:

  1. this is nice. i must to try to make something to my son..

    ReplyDelete
  2. Thanks for detailing the entire project. My son, who is 6, wants to be the golden ninja this year. Hopefully, my project is as successful as yours. Again, thank you for sharing.

    ReplyDelete
  3. Good luck! If I can do it, anyone can!

    ReplyDelete
  4. Oh my goodness, thank you SOOOOOOO much for this!! It's going to be a huge time saver for me this year!

    ReplyDelete
  5. Can I just say thank you!!! I made my costume cause I couldn't find things to dye but I have referred to this many many many times in painting and making sure it looks right

    ReplyDelete
  6. Thank you so much for documenting your project! My 6 year old son LOVES the green ninja and wanted this to be his Halloween costume. I followed all your directions and used your pics to guide me and the costume turned out AWESOME!!!

    ReplyDelete
  7. Thank you so much for posting this! I made this for my son and it turned out very well! I've never made a costume before, so I'm very proud of this. If I could do it, anyone can! Thanks so much!

    ReplyDelete
  8. I so want to thank you. It is a big help
    thanks

    ReplyDelete
  9. Thank you for sharing this method. It's very affordable and does not require a lot of time. I have two to make this Halloween and this is by far the best idea I found online.

    ReplyDelete
  10. Thank you so much for this post! Just figuring out how to make a green ninja costume for my 6-years old for first of may costume party. We have an old karate uniform somewhere.... Greetings from Finland!

    ReplyDelete